Tradesperson’s invoice: showing labour costs under section 35a EStG
Contents
If you renovate, repair or modernise homes for private customers in Germany, you know the question: “Is the labour share on the invoice?” The reason is section 35a of the German Income Tax Act (EStG). Under it, your customer’s income tax is reduced by 20 per cent of the labour costs for work done by tradespeople in their home, by no more than €1,200 a year. To claim it, according to the Federal Ministry of Finance, the labour share has to be identifiable from your invoice. This guide shows how you can state labour costs on a tradesperson’s invoice and what the law, the ministry and the courts say about it.
It is written for trades businesses in Germany and covers German law. Most of the linked sources are in German, and we give the German terms where they help. It summarises public sources as of 4 November 2026 and is not legal or tax advice: we are a software company.
The tax reduction for tradespeople’s work: what section 35a EStG provides
The rule is in section 35a EStG (in German). These parts matter for the invoice:
- 20 per cent, at most €1,200. For tradespeople’s work on renovation, maintenance and modernisation, income tax is reduced on application by 20 per cent of the expenses, by no more than €1,200 (subsection 3, sentence 1). The cap is reached at €6,000 of labour costs.
- Labour costs only. The deduction applies only to labour costs (subsection 5, sentence 2).
- Invoice and bank account. The condition is that the customer has received an invoice and that payment has been made into the business’s account (subsection 5, sentence 3).
- In the home. The work qualifies if it is done in the customer’s household in the EU or the EEA (subsection 4, sentence 1).
- No double benefit. Publicly funded measures for which subsidised loans or tax-free grants are used are excluded (subsection 3, sentence 2), and so are expenses that are business expenses or income-related expenses (subsection 5, sentence 1).
How the tax authorities apply this is set out in a letter from the Federal Ministry of Finance (BMF) of 9 November 2016, amended on 1 September 2021. We quote the version in the ministry’s official Income Tax Handbook 2025 (in German); the paragraph numbers (Randnummern, “para.” below) refer to it. We found no newer BMF letter on section 35a in the ministry’s search. For public funding, the BMF looks at each individual measure: if the customer has a subsidised heating system installed and has the outer walls insulated without a subsidy, the insulation still qualifies (paras. 23 and 24).
What counts as labour costs
The BMF describes labour costs as the expenses for the work itself, “including the machine and travel costs charged on the invoice” (para. 39). Materials and other goods supplied are left out, with the exception of consumables. Only work done in the household qualifies. Annex 1 of the letter (in German) classifies many cases. These are the most relevant for a tradesperson’s invoice:
| Item | Qualifies? | Reference |
|---|---|---|
| Working time in the home | yes | para. 39 |
| Call-out and travel costs, if charged | yes | para. 39 |
| Machine costs, if charged | yes | para. 39 |
| Materials such as paint, tiles, mortar, wallpaper | no, nor the VAT on them | para. 39, Annex 1 |
| Consumables such as lubricants, cleaning agents, detergents, grit | yes, as an ancillary service; decided case by case | Annex 1 |
| Disposal, such as rubble or old tiles when a bathroom is retiled | yes as an ancillary service, no as the main service | Annex 1 |
| Work in your own workshop | no; to be marked as such on the invoice | para. 39 |
| Checking that a system works properly | yes, also with a certificate for official purposes | para. 20 |
| Energy performance certificate, valuation, reports for financing | no | para. 20 |
| Work on a new build until it is completed | no | para. 21 |
According to the BMF, the household usually ends at the property boundary. Work on a neighbouring third-party or public plot only qualifies by way of exception, if it directly adjoins the property and the work serves the household (para. 2). A job done partly on site and partly elsewhere is to be split (para. 40). Whether the expenses count as maintenance or production costs for income tax purposes is not decisive, and work that creates new living or usable space in an existing household qualifies (para. 19).
The labour share on the invoice: what the BMF expects
The BMF does not prescribe any fixed wording. It expects the labour share to be identifiable “as a rule, separately from the details in the invoice” (para. 40). In detail:
- Readable from the invoice. If labour, travel and materials are separate line items, the share can be worked out from the invoice. A line with the total labour costs saves your customer the arithmetic.
- Percentage split. According to the BMF, the business may also split the invoice amount into labour and materials by percentage.
- No estimates. According to the BMF, the customer may not estimate the share themselves.
- Maintenance contracts. Here, according to the BMF, an annex to the invoice is enough, even with a flat-rate share from a mixed calculation.
On VAT, the BMF states that a separate statement of the VAT attributable to the labour costs is not required (para. 40). At the same time, Annex 1 lists materials “including the VAT on them” as not qualifying. Taken together, this suggests that labour costs count including the VAT on them. The letter does not say so in a sentence of its own. If the invoice gives the labour costs gross and the VAT included in them, your customer sees both figures.
Worked example: a newly tiled bathroom
An example with made-up round figures. A business retiles a private customer’s bathroom and invoices at net prices plus 19 per cent VAT:
| Line item | Net | Counts as |
|---|---|---|
| 20 hours of tiling at €50.00 | €1,000.00 | labour costs |
| Travel, 100 km at €0.50 | €50.00 | labour costs (travel) |
| Tiles and adhesive, flat rate | €800.00 | materials |
| Total net | €1,850.00 | |
| VAT 19% | €351.50 | |
| Invoice amount | €2,201.50 |
The labour costs are €1,050.00 net plus €199.50 VAT, €1,249.50 in total. Below the total, a German invoice could state this, for example, as: „Im Rechnungsbetrag sind Arbeitskosten (Arbeit und Anfahrt) von 1.249,50 € enthalten, darin 199,50 € Umsatzsteuer.“ (The invoice amount includes labour costs for work and travel of €1,249.50, of which €199.50 is VAT.)
If the customer pays by bank transfer, they can claim 20 per cent of that under the current wording, which is €249.90. The tax office deducts the reduction from their income tax. If it exceeds their tax, the tax office neither refunds the difference nor carries it over to another year (para. 56).
Interim invoices and the turn of the year
Larger jobs bring interim invoices. According to the BMF, interim payments only count if a corresponding split has been made for them and there is an invoice that meets the requirements of section 35a (para. 40). Payment into the account applies to them too (para. 49), and what counts is the year of payment (para. 44).
Read together, paras. 40 and 44 mean this for the example: if the business issues an interim invoice in December 2026 for 10 hours of work, €500.00 net and €595.00 gross, stating labour costs of €595.00, and the customer pays it in December, the amount belongs to 2026. If the final invoice in January 2027 states the labour costs for the whole job (€1,249.50), that leaves €654.50 for 2027. To stop the interim payment being counted twice, it helps if the final invoice says whether the labour costs it states include the interim invoices.
How interim and final invoices fit together in the trades is covered in Interim and final invoices in the trades.
Planned: 15 per cent and at most €900 from 2027
The federal government wants to cut the reduction. The draft Income Tax Reform Act 2027 (Bundestag printed paper 21/8235 of 28 September 2026, in German) rewrites section 35a(3) sentence 1: 15 per cent of the expenses, at most €900, for the first time for 2027 (Article 1 nos. 5 and 8). The explanatory memorandum says that section 35a(3) is one of the 20 largest subsidy provisions in income tax law and that its subsidy effect is to be scaled back.
It has not been passed as of 4 November 2026. The Bundesrat gave its opinion on 16 October 2026, and its opinion (printed paper 507/26 (Beschluss), in German) contains no point on section 35a. Two of its committees had recommended deleting the cut and examining a materiality threshold respectively (printed paper 507/1/26); neither made it into the opinion. The Bundestag’s Finance Committee (in German) scheduled an expert hearing on the draft for 4 November 2026. Until it is passed, the current wording applies: 20 per cent, at most €1,200.
On our reading, if the draft is passed as it stands, the payment date matters for your customer, because according to the BMF the year of payment counts (para. 44): payments up to 31 December 2026 at 20 per cent, payments from 2027 at 15 per cent. In the worked example that would be €249.90 against around €187. With the interim invoice from the example: 20 per cent of €595.00 for 2026 (€119.00) and 15 per cent of €654.50 for 2027 (around €98). Under both versions the cap is reached at €6,000 of labour costs.
When the labour share is missing: what the courts have said
For tax purposes, a missing figure affects the customer first: they may not estimate the share themselves (para. 40). Under civil law, it can hold up payment. In 2019 the Braunschweig Local Court (Amtsgericht) ruled that a consumer may refuse to pay until the invoice is supplemented with the labour costs it contains, even without a separate agreement. The business, the court said, has an ancillary contractual duty to state the labour costs specifically on the invoice (judgment of 15 May 2019, case 115 C 2845/18, according to the court’s press release, in German). This is a decision of a single local court, and other courts are not bound by it.
Related, but on a different case: on 13 March 2026 the Hamm Higher Regional Court (Oberlandesgericht) ruled on an overcharged invoice (case 12 U 138/25). A claim to have the invoice corrected follows from the contract as an ancillary duty, it held, at least where both sides consider the invoice in need of correction and the customer wants to claim the work for tax purposes. Because of this claim, the customer may withhold the entire payment (section 273 BGB). The court allowed an appeal on points of law because, in its words, the question has not yet been fully settled at the highest level (NRWE, in German).
A checklist for invoices to private customers
From the sources above, a short checklist for a tradesperson’s invoice to a private customer can be derived:
- Labour, travel, machines and materials are separate line items (paras. 39, 40).
- The invoice states the total labour costs, with the VAT included in them.
- Work done in your workshop is marked as such (para. 39).
- Interim invoices state their own labour costs (para. 40), and the final invoice says whether its total includes the interim invoices.
- The invoice gives your bank details. According to the BMF, cash payments are not recognised (para. 50).
What Kladde does here
KYTH.Kladde is our invoicing software for trades and small businesses, in the browser and on your phone. Its interface and invoices are in German. For the points in this guide, Kladde does the following:
- Kladde works out the labour costs contained in each invoice and prints them on invoices to private customers. The figure is information for your customer.
- Every interim invoice gets its own number. The final invoice deducts each interim payment received, VAT included, applies any early-payment discount and shows what is still outstanding.
- Next to the due date there is a GiroCode. Your customer scans it with their banking app, and the amount and IBAN are already filled in.
- For the small business scheme under section 19 UStG, the invoice carries the right note instead of VAT.
Kladde calculates from what you enter and does not judge whether work qualifies. That is not tax advice, and the decision on the reduction lies with your customer’s tax office. Kladde is available by invitation, at €15 per month per business plus VAT, for every user in the business and with no fee per invoice.
Frequently asked questions about labour costs on trade invoices
Does a tradesperson have to show labour costs on the invoice?
For tax purposes, the Federal Ministry of Finance expects the labour share to be identifiable from the details in the invoice, and the customer may not estimate it (BMF letter of 9 November 2016 as amended on 1 September 2021, para. 40). Under civil law, the Braunschweig Local Court ruled in 2019 that a consumer may withhold payment until the labour costs appear on the invoice (case 115 C 2845/18). That is a single local court decision. We have not found a ruling by the Federal Court of Justice on this question.
Do travel and machine costs count as labour costs?
According to the BMF, yes: labour costs include the machine and travel costs charged on the invoice. Materials and other goods supplied do not count, with the exception of consumables such as lubricants, cleaning agents or detergents (BMF letter on section 35a EStG, para. 39 and Annex 1).
Does the VAT on the labour costs have to be shown separately?
According to the BMF, no. The letter states that a separate statement of the VAT attributable to the labour costs is not required (para. 40). Under Annex 1, materials including the VAT on them do not qualify.
Do interim payments count towards the tax reduction?
According to the BMF, only if a corresponding split has been made for the interim payment and there is an invoice that meets the requirements of section 35a EStG (para. 40). Payment into the business's account applies to interim payments too (para. 49). What counts is the year of payment (para. 44).
Does the tax reduction apply to cash payments?
No. Section 35a(5) sentence 3 EStG requires payment into the account of the person providing the service. According to the BMF, cash payments, cash deposits and cash instalments are not recognised, even if the business booked them properly or they are later replaced by a bank transfer. Recognised methods include bank transfers, standing orders and card payments via the electronic cash system, together with the bank statement (para. 50).
Can businesses under the small business scheme provide qualifying work?
Yes. According to the BMF, the business does not need to be entered in the register of craftspeople (Handwerksrolle), and small businesses under section 19 UStG can also provide qualifying work (para. 22). Their invoices carry no VAT, so the labour costs are stated without VAT.
Will the tax reduction for tradespeople's work change in 2027?
That is the plan. The government draft of the Income Tax Reform Act 2027 (Bundestag printed paper 21/8235) provides for 15 per cent instead of 20 per cent from 2027, capped at €900 instead of €1,200. It has not been passed as of 4 November 2026. Until then, section 35a(3) sentence 1 EStG applies in its current wording.
This guide summarises publicly available sources (section 35a EStG, the BMF letter of 9 November 2016 as amended on 1 September 2021 with Annex 1, the government draft of the Income Tax Reform Act 2027 in Bundestag printed paper 21/8235, Bundesrat printed papers 507/26 (Beschluss) and 507/1/26, the Braunschweig Local Court press release of 5 August 2019 and the judgment of the Hamm Higher Regional Court of 13 March 2026) and is no substitute for legal or tax advice. The worked example is made up. The cut from 2027 is a draft and has not been passed. Last checked: 4 November 2026.
Let's talk.
KYTH.Kladde: invoicing software for trades
See Kladde →All guides on invoicing in the trades →Sample invoices as PDF →Default interest calculator →